dmesg - AMD Radeon HD 7900
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.0-sabayon (root@andromeda.sabayon.org) (gcc version 4.8.3 (Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) ) #1 SMP Tue Jan 20 08:34:48 UTC 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfe6ffff] usable
BIOS-e820: [mem 0x00000000dfe70000-0x00000000dfe87fff] ACPI data
BIOS-e820: [mem 0x00000000dfe88000-0x00000000dfedbfff] ACPI NVS
BIOS-e820: [mem 0x00000000dfedc000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: System manufacturer System Product Name/P7P55D-E DELUXE, BIOS 1601 09/28/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02312000, 0x02312fff] PGTABLE
BRK [0x02313000, 0x02313fff] PGTABLE
BRK [0x02314000, 0x02314fff] PGTABLE
init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[mem 0x21fe00000-0x21fffffff] page 2M
BRK [0x02315000, 0x02315fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
[mem 0x21c000000-0x21fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdfe6ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdfdfffff] page 2M
[mem 0xdfe00000-0xdfe6ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x02316000, 0x02316fff] PGTABLE
BRK [0x02317000, 0x02317fff] PGTABLE
RAMDISK: [mem 0x35e22000-0x36f08fff]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
NODE_DATA(0) allocated [mem 0x21fff6000-0x21fff9fff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xdfe6ffff]
node 0: [mem 0x100000000-0x21fffffff]
Initmem setup node 0 [mem 0x00001000-0x21fffffff]
On node 0 totalpages: 2096652
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14266 pages used for memmap
DMA32 zone: 913008 pages, LIFO batch:31
Normal zone: 18432 pages used for memmap
Normal zone: 1179648 pages, LIFO batch:31
SFI: Simple Firmware Interface v0.81
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: P6XVC2X8
MPTABLE: Product ID:
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #2
Processor #4
Processor #6
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Processors: 4
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xdfe70000-0xdfe87fff]
PM: Registered nosave memory: [mem 0xdfe88000-0xdfedbfff]
PM: Registered nosave memory: [mem 0xdfedc000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s75968 r8192 d30528 u524288
pcpu-alloc: s75968 r8192 d30528 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063869
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8151804K/8386608K available (8738K kernel code, 1037K rwdata, 4196K rodata, 1100K init, 960K bss, 234804K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:4352 nr_irqs:456 0
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 2674.834 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5349.66 BogoMIPS (lpj=2674834)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys bfqio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys debug
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff82218000 - ffffffff82220000)
ExtINT not setup in hardware but reported by MP table
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21398.67 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdfe88000-0xdfedbfff] (344064 bytes)
xor: measuring software checksum speed
prefetch64-sse: 10840.000 MB/sec
generic_sse: 9580.000 MB/sec
xor: using function: prefetch64-sse (10840.000 MB/sec)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCI: Using configuration type 1 for base access
raid6: sse2x1 6406 MB/s
raid6: sse2x2 7679 MB/s
raid6: sse2x4 8023 MB/s
raid6: using algorithm sse2x4 (8023 MB/s)
raid6: using ssse3x2 recovery algorithm
ACPI: Interpreter disabled.
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: root bus 00: using default resources
PCI: Probing PCI hardware (bus 00)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf68fe000-0xf68fe3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf68f8000-0xf68fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf68fd000-0xf68fd3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x9880-0x9887]
pci 0000:00:1f.2: reg 0x14: [io 0x9800-0x9803]
pci 0000:00:1f.2: reg 0x18: [io 0x9480-0x9487]
pci 0000:00:1f.2: reg 0x1c: [io 0x9400-0x9403]
pci 0000:00:1f.2: reg 0x20: [io 0x9080-0x909f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf68f7000-0xf68f77ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf68fc000-0xf68fc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xffe0-0xffff]
pci 0000:01:00.0: [1002:6798] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf6980000-0xf69bffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xa000-0xa0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xf69c0000-0xf69dffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf69fc000-0xf69fffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
pci 0000:00:03.0: bridge window [mem 0xf6900000-0xf69fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:06:00.0: [10b5:8608] type 01 class 0x060400
pci 0000:06:00.0: reg 0x10: [mem 0xf6ce0000-0xf6cfffff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 06-0b]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf6c00000-0xf6efffff]
pci 0000:07:01.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:05.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
pci 0000:07:07.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
pci 0000:07:09.0: [10b5:8608] type 01 class 0x060400
pci 0000:07:09.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-0b]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xf6d00000-0xf6efffff]
pci 0000:08:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xf6dfe000-0xf6dfffff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PCI bridge to [bus 08]
pci 0000:07:01.0: bridge window [mem 0xf6d00000-0xf6dfffff]
pci 0000:09:00.0: [1b4b:9123] type 00 class 0x010601
pci 0000:09:00.0: reg 0x10: [io 0xdc00-0xdc07]
pci 0000:09:00.0: reg 0x14: [io 0xd880-0xd883]
pci 0000:09:00.0: reg 0x18: [io 0xd800-0xd807]
pci 0000:09:00.0: reg 0x1c: [io 0xd480-0xd483]
pci 0000:09:00.0: reg 0x20: [io 0xd400-0xd40f]
pci 0000:09:00.0: reg 0x24: [mem 0xf6eff000-0xf6eff7ff]
pci 0000:09:00.0: reg 0x30: [mem 0xf6ee0000-0xf6eeffff pref]
pci 0000:09:00.0: PME# supported from D3hot
pci 0000:07:05.0: PCI bridge to [bus 09]
pci 0000:07:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:07:05.0: bridge window [mem 0xf6e00000-0xf6efffff]
pci 0000:07:07.0: PCI bridge to [bus 0a]
pci 0000:07:09.0: PCI bridge to [bus 0b]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xc800-0xc8ff]
pci 0000:05:00.0: reg 0x18: [mem 0xf5fff000-0xf5ffffff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xf5ff8000-0xf5ffbfff 64bit pref]
pci 0000:05:00.0: reg 0x30: [mem 0xf6bf0000-0xf6bfffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf6b00000-0xf6bfffff]
pci 0000:00:1c.4: bridge window [mem 0xf5f00000-0xf5ffffff 64bit pref]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xb800-0xb8ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf5eff000-0xf5efffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xf5ef8000-0xf5efbfff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0xf6af0000-0xf6afffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xf6a00000-0xf6afffff]
pci 0000:00:1c.5: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 03]
pci 0000:00:1c.7: PCI bridge to [bus 02]
pci 0000:0c:02.0: [14f1:8800] type 00 class 0x040000
pci 0000:0c:02.0: reg 0x10: [mem 0xf7000000-0xf7ffffff]
pci 0000:0c:03.0: [1106:3044] type 00 class 0x0c0010
pci 0000:0c:03.0: reg 0x10: [mem 0xf6fff000-0xf6fff7ff]
pci 0000:0c:03.0: reg 0x14: [io 0xec00-0xec7f]
pci 0000:0c:03.0: supports D2
pci 0000:0c:03.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xf6f00000-0xf7ffffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0c
pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:3b02]
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfe70000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
pnp: PnP ACPI: disabled
pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.7: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.7: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.7: BAR 15: assigned [mem 0x220000000-0x2201fffff 64bit pref]
pci 0000:00:1c.7: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xa000-0xafff]
pci 0000:00:03.0: bridge window [mem 0xf6900000-0xf69fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:07:01.0: PCI bridge to [bus 08]
pci 0000:07:01.0: bridge window [mem 0xf6d00000-0xf6dfffff]
pci 0000:07:05.0: PCI bridge to [bus 09]
pci 0000:07:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:07:05.0: bridge window [mem 0xf6e00000-0xf6efffff]
pci 0000:07:07.0: PCI bridge to [bus 0a]
pci 0000:07:09.0: PCI bridge to [bus 0b]
pci 0000:06:00.0: PCI bridge to [bus 07-0b]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xf6d00000-0xf6efffff]
pci 0000:00:1c.0: PCI bridge to [bus 06-0b]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf6c00000-0xf6efffff]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf6b00000-0xf6bfffff]
pci 0000:00:1c.4: bridge window [mem 0xf5f00000-0xf5ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xf6a00000-0xf6afffff]
pci 0000:00:1c.5: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 03]
pci 0000:00:1c.7: PCI bridge to [bus 02]
pci 0000:00:1c.7: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.7: bridge window [mem 0x220000000-0x2201fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xf6f00000-0xf7ffffff]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xf6900000-0xf69fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xf6c00000-0xf6efffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xf6d00000-0xf6efffff]
pci_bus 0000:08: resource 1 [mem 0xf6d00000-0xf6dfffff]
pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xf6e00000-0xf6efffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xf6b00000-0xf6bfffff]
pci_bus 0000:05: resource 2 [mem 0xf5f00000-0xf5ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xf6a00000-0xf6afffff]
pci_bus 0000:04: resource 2 [mem 0xf5e00000-0xf5efffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:02: resource 2 [mem 0x220000000-0x2201fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0c: resource 1 [mem 0xf6f00000-0xf7ffffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0xffff]
pci_bus 0000:0c: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:01:00.0: Video device with shadowed ROM
pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pci 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:07:01.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pci 0000:08:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17308K (ffff880035e22000 - ffff880036f09000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbe70000-0xdfe70000] (64MB) mapped at [ffff8800dbe70000-ffff8800dfe6ffff]
platform rtc_cmos: registered platform RTC device (no PNP device found)
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1422139510.589:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
QNX4 filesystem 0.2.3 registered.
aufs 3.18-20141215
msgmni has been set to 15955
async_tx: api initialized (async)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler version: v7r6
pcieport 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pcieport 0000:00:03.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: PCI->APIC IRQ transform: INT A -> IRQ 17
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: PCI->APIC IRQ transform: INT B -> IRQ 16
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.6: PCI->APIC IRQ transform: INT C -> IRQ 18
pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
pcieport 0000:00:1c.7: enabling device (0104 -> 0107)
pcieport 0000:00:1c.7: PCI->APIC IRQ transform: INT D -> IRQ 19
pcieport 0000:00:1c.7: irq 29 for MSI/MSI-X
pcieport 0000:07:05.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pcieport 0000:07:07.0: PCI->APIC IRQ transform: INT A -> IRQ 19
pcieport 0000:07:09.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:05.0: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:07.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:09.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.7:pcie04: Slot #135 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000e80000, using 1536k, total 1536k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
xenfs: not registering filesystem on non-xen platform
platform serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
brd: module loaded
loop: module loaded
HP CISS Driver (v 3.6.26)
MM: desc_per_page = 128
Loading iSCSI transport class v2.0-870.
fnic: Cisco FCoE HBA Driver, ver 1.6.0.11
fnic: Successfully Initialized Trace Buffer
fnic: Successfully Initialized FC_CTLR Trace Buffer
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.2-0[30300]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.16-k.
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 10.4.8000.0.
Copyright(c) 2004-2014 Emulex. All rights reserved.
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 06.805.06.00-rc1 Thu. Sep. 4 17:00:00 PDT 2014
mpt2sas version 18.100.00.00 loaded
mpt3sas version 04.100.00.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012)
RocketRAID 3xxx/4xxx Controller driver v1.8
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
VMware PVSCSI driver - version 1.0.5.0-k
st: Version 20101219, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI->APIC IRQ transform: INT D -> IRQ 21
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf68f7000 port 0xf68f7100 irq 30
ata2: SATA max UDMA/133 abar m2048@0xf68f7000 port 0xf68f7180 irq 30
ata3: SATA max UDMA/133 abar m2048@0xf68f7000 port 0xf68f7200 irq 30
ata4: SATA max UDMA/133 abar m2048@0xf68f7000 port 0xf68f7280 irq 30
ata5: SATA max UDMA/133 abar m2048@0xf68f7000 port 0xf68f7300 irq 30
ata6: SATA max UDMA/133 abar m2048@0xf68f7000 port 0xf68f7380 irq 30
ahci 0000:09:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
ahci 0000:09:00.0: irq 31 for MSI/MSI-X
ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:09:00.0: port 0 can do FBS, forcing FBSCP
ahci 0000:09:00.0: port 1 can do FBS, forcing FBSCP
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m2048@0xf6eff000 port 0xf6eff100 irq 31
ata8: SATA max UDMA/133 abar m2048@0xf6eff000 port 0xf6eff180 irq 31
libphy: Fixed MDIO Bus: probed
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.20
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
device-mapper: raid: Loading target version 1.6.0
ledtrig-cpu: registered to indicate activity on CPUs
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
TCP: bic registered
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
registered taskstats version 1
Btrfs loaded
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.
ata8: SATA link down (SStatus 0 SControl 370)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 370)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-9: ST2000DM001-1ER164, CC43, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: ATA-8: ST3500320AS, SD1A, max UDMA/133
ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC43 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata7.00: configured for UDMA/133
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
Switched to clocksource tsc
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.01, max UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.01 PQ: 0 ANSI: 5
sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: HPA detected: current 976771055, native 976773168
ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
ata4.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ 0-12 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 3:0:0:0: [sdb] Attached SCSI disk
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5
sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3
sd 6:0:0:0: [sdc] Attached SCSI disk
Freeing unused kernel memory: 1100K (ffffffff82105000 - ffffffff82218000)
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 1492K (ffff88000188b000 - ffff880001a00000)
Freeing unused kernel memory: 1948K (ffff880001e19000 - ffff880002000000)
systemd-udevd[492]: starting version 215
random: systemd-udevd urandom read with 107 bits of entropy available
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
xhci_hcd 0000:08:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:08:00.0: irq 32 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 33 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 34 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 35 for MSI/MSI-X
xhci_hcd 0000:08:00.0: irq 36 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.18.0-sabayon xhci-hcd
usb usb1: SerialNumber: 0000:08:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 2
[drm] VGACON disable radeon kernel modesetting.
[drm:radeon_init] *ERROR* No UMS support in radeon module!
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.18.0-sabayon xhci-hcd
usb usb2: SerialNumber: 0000:08:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
random: nonblocking pool is initialized
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf68fe000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.18.0-sabayon ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf68fd000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.18.0-sabayon ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
[drm] VGACON disable radeon kernel modesetting.
[drm:radeon_init] *ERROR* No UMS support in radeon module!
usb 3-1: New USB device found, idVendor=8087, idProduct=0020
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0020
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
usb 3-1.2: new high-speed USB device number 3 using ehci-pci
usb 4-1.3: new full-speed USB device number 3 using ehci-pci
usb 3-1.2: New USB device found, idVendor=058f, idProduct=6362
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.2: Product: Mass Storage Device
usb 3-1.2: Manufacturer: Generic
usb 3-1.2: SerialNumber: 058F312D81B1
usb-storage 3-1.2:1.0: USB Mass Storage device detected
scsi host8: usb-storage 3-1.2:1.0
usb 4-1.3: New USB device found, idVendor=22ba, idProduct=0109
usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.3: Product: Generic USB Hub
usb 4-1.3: Manufacturer: Technology Innovation
PM: Starting manual resume from disk
hub 4-1.3:1.0: USB hub found
hub 4-1.3:1.0: 3 ports detected
usb 3-1.5: new high-speed USB device number 4 using ehci-pci
usb 4-1.5: new full-speed USB device number 4 using ehci-pci
usb 4-1.5: New USB device found, idVendor=046d, idProduct=c52b
usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.5: Product: USB Receiver
usb 4-1.5: Manufacturer: Logitech
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
usb 4-1.6: new full-speed USB device number 5 using ehci-pci
usb 3-1.5: New USB device found, idVendor=046d, idProduct=09a1
usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 3-1.5: SerialNumber: ED261B10
usb 4-1.6: New USB device found, idVendor=1d9d, idProduct=1010
usb 4-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-1.3.1: new full-speed USB device number 6 using ehci-pci
usb 4-1.3.1: New USB device found, idVendor=22ba, idProduct=0108
usb 4-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.3.1: Product: Universal Controller
usb 4-1.3.1: Manufacturer: Technology Innovation
input: Technology Innovation Universal Controller as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3.1/4-1.3.1:1.0/0003:22BA:0108.0004/input/input2
hid-generic 0003:22BA:0108.0004: input,hidraw0: USB HID v1.01 Joystick [Technology Innovation Universal Controller] on usb-0000:00:1d.0-1.3.1/input0
scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:1: Attached scsi generic sg5 type 0
sd 8:0:0:2: Attached scsi generic sg6 type 0
sd 8:0:0:3: Attached scsi generic sg7 type 0
sd 8:0:0:3: [sdg] Attached SCSI removable disk
sd 8:0:0:0: [sdd] Attached SCSI removable disk
sd 8:0:0:1: [sde] Attached SCSI removable disk
sd 8:0:0:2: [sdf] Attached SCSI removable disk
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
NET: Registered protocol family 10
systemd[1]: ip6tables.service lacks ExecStart setting. Refusing.
systemd[1]: iptables.service lacks ExecStart setting. Refusing.
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x21c offMax=0x193e0
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008).
Adding 8388604k swap on /dev/sda5. Priority:-1 extents:1 across:8388604k FS
EXT4-fs (sda2): re-mounted. Opts: (null)
systemd-udevd[657]: starting version 215
EXT4-fs (sdb3): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sdb3): recovery complete
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.23)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[615]: Received request to flush runtime journal from PID 1
systemd-journald[615]: File /var/log/journal/5fc210d0f6a54c4b90efe3a6f129e503/system.journal corrupted or uncleanly shut down, renaming and replacing.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
r8169 0000:05:00.0: irq 37 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168d/8111d at 0xffffc90001a4e000, e0:cb:4e:46:96:33, XID 083000c0 IRQ 37
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
r8169 0000:04:00.0: irq 38 for MSI/MSI-X
r8169 0000:04:00.0 eth1: RTL8168d/8111d at 0xffffc90001a50000, 90:e6:ba:3e:cb:20, XID 083000c0 IRQ 38
r8169 0000:04:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
input: PC Speaker as /devices/platform/pcspkr/input/input3
i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 18
ACPI Exception: AE_BAD_PARAMETER, Thread 301511712 could not acquire Mutex [0x1] (20140926/utmutex-285)
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
snd_hda_intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 39 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: PCI->APIC IRQ transform: INT B -> IRQ 17
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 40 for MSI/MSI-X
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input4
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input9
sound hdaudioC0D0: autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x2d/0x2e
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x29
sound hdaudioC0D0: Rear Mic=0x2b
sound hdaudioC0D0: Line=0x2a
sound hdaudioC0D0: CD=0x2c
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
media: Linux media interface: v0.10
Linux video capture interface: v2.00
cx8800 0000:0c:02.0: PCI->APIC IRQ transform: INT A -> IRQ 17
cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected], frontend(s): 0
microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
ACPI Exception: AE_BAD_PARAMETER, Thread 3660769344 could not acquire Mutex [0x1] (20140926/utmutex-285)
ACPI Exception: AE_BAD_PARAMETER, Thread 3660769344 could not acquire Mutex [0x1] (20140926/utmutex-285)
ACPI Exception: AE_BAD_PARAMETER, Thread 3660769344 could not acquire Mutex [0x1] (20140926/utmutex-285)
ACPI Exception: AE_BAD_PARAMETER, Thread 3660769344 could not acquire Mutex [0x1] (20140926/utmutex-285)
All bytes are equal. It is not a TEA5767
tuner 1-0060: Tuner -1 found with type(s) Radio TV.
microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
microcode: Microcode Update Driver: v2.00 , Peter Oruba
tda9887 1-0043: creating new instance
tda9887 1-0043: tda988[5/6/7] found
tuner 1-0043: Tuner 74 found with type(s) Radio TV.
cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
cdc_acm 4-1.6:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
tuner-simple 1-0060: creating new instance
tuner-simple 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
usbcore: registered new interface driver uas
Registered IR keymap rc-winfast
input: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:0c:02.0/rc/rc0/input19
rc0: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:1e.0/0000:0c:02.0/rc/rc0
cx88[0]/0: found at 0000:0c:02.0, rev: 5, irq: 17, latency: 64, mmio: 0xf7000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
firewire_ohci 0000:0c:03.0: PCI->APIC IRQ transform: INT A -> IRQ 18
firewire_ohci 0000:0c:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
gpio_ich: GPIO from 436 to 511 on gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
usb 3-1.5: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 3-1.5: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
usbcore: registered new interface driver snd-usb-audio
firewire_core 0000:0c:03.0: created device fw0: GUID 001e8c0000c4862d, S400
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5/input2
input: Logitech Unifying Device. Wireless PID:2010 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input20
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2010] on usb-0000:00:1d.0-1.5:1
input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input21
logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:1d.0-1.5:2
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 7749 MBytes.
[fglrx] vendor: 1002 device: 6798 revision: 0 count: 1
[fglrx] ioport: bar 4, base 0xa000, size: 0x100
pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.50.2 [Nov 20 2014] with 1 minors
uvcvideo: Found UVC 1.00 device (046d:09a1)
input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input22
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
r8169 0000:05:00.0 eth0: link down
r8169 0000:05:00.0 eth0: link down
r8169 0000:04:00.0 eth1: link down
r8169 0000:05:00.0 eth0: link up
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
fglrx_pci 0000:01:00.0: irq 41 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1623
[fglrx] Firegl kernel thread PID: 1624
[fglrx] Firegl kernel thread PID: 1625
[fglrx] IRQ 41 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[fglrx] Reserved FB block: Unshared offset:fff8000, size:8000
[fglrx] Reserved FB block: Unshared offset:bfff3000, size:d000
[fglrx] ACPI is disabled on this system
ACPI Exception: AE_BAD_PARAMETER, Thread 316263984 could not acquire Mutex [0x1] (20140926/utmutex-285)
[fglrx] ACPI is disabled on this system
ACPI Exception: AE_BAD_PARAMETER, Thread 4187401072 could not acquire Mutex [0x1] (20140926/utmutex-285)
[fglrx] ACPI is disabled on this system
snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.